Truck Tires

20 Inch Tires

One of the most important factors to take into consideration when choosing tires is the size needed. The proper size is required, as this will ensure that your vehicle has the proper support for handling road conditions. For example, if your vehicle requires 20 inch tires, then you should not try to substitute another size. Choosing the wrong tire size not only is dangerous, but it is a waste of money as most often the tires simply will not work with your selected vehicle. There are three types of tires and these include bias ply, radial and belted bias. In addition to basic types, there are numerous treads, designs, and sizes to choose from. Tires should be purchased with plenty of consideration given to the matter.

Whether choosing 20 inch tires or another size it is important that you care for your tires properly as this reduces the risk of their becoming damaged and helps ensure their longevity. Motorists should ensure they drive safely and responsibly in order to preserve the life of their tires. To keep tires lasting utilize good driving habits and avoid practices that will take a toll on tires such as fast braking or sudden stops. Be certain not to jerk the vehicle and never pull or peel out of a driveway or make sharp turns. In addition to these practices being dangerous, they also put a toll on the vehicle.

Another factor to keep in mind when taking care of 20 inch tires is that they should remain properly inflated. Tires should be rotated after every 6,000 miles of driving or after six months, whichever comes first. Make certain to have your vehicle’s wheel alignment checked to ensure that you are utilizing the safest measures while on the road. Always make certain you understand how much weight your vehicle can handle and do not weigh down or overload your vehicle as this causes undue pressure on tires.

Always check the tread on your tires to make certain they can handle the road and do not overinflate 20 inch tires as this can cause tires to pop. Make certain that your tires meet safety standards and adhere to the dictates of law. Tires that have lost a significant amount of their tread or that are ill fitting can pose a serious safety hazard to the motorist and others driving on the road.

When checking tread on 20 inch tires look for signs of over inflation, under inflation, feathering, wear on one side, if the tire appears to have cupping, and if there is second rib wear. Those looking for signs of over inflation on tire tread should study the center portion. If the tire has been subjected to over inflation, the center area will have reduced tread. Use a tire gauge when filling 20 inch tires and do not try to visually guess how much air the tire is filled with. If you see the tread is deteriorating then you will need to replace the tire.

If you are trying to determine if the 20 inch tires are under inflated, you will find the best way to test is by using a tire pressure gauge. If the tires are under inflated and the tread looks fine, then fill the tires with the correct amount of air. By using a tire gauge you can rest assured that your tires have the proper air pressure needed to perform correctly.

Feathering is when the edge of the tread begins to fray or where one side of the tread develops a sharp edge and the other is more round. Feathering may occur due to the tire not being seated correctly. One side wear may occur on 20 inch tires when the one side of the rib wears away at a faster rate than the other. Cupping occurs when the tread appears to have a cupped edging, which indicates a problem with the vehicle’s suspension. Second rib wear occurs primarily on radial tires. Tires should be rotated to ensure that tread wear is distributed evenly. When tires are not maintained with proper air pressure and the tire is not rotated, tread can build upon the steel belts. This type of wear can be dangerous and may have fatal consequences for motorists. Always check 20 inch tires to ensure they have proper air pressure, that the tread is in good condition, and replace tires that pose a threat to safety immediately.

Related Information